Page 3 of 3 FirstFirst 123
Results 21 to 24 of 24

Thread: Do we need something else for our TR24's

  1. #21
    Junior Elf member
    Join Date
    Nov 2018
    Location
    Northeast Mass
    Posts
    15
    Quote Originally Posted by Phoenix View Post
    I almost sounds like you have the wrong firmware flashed into the PIC,,,which one did you use?
    Thanks Mac, I will look at that when I get down to the boards as I left the pickit down there. I did go back and forth with DMX and standard, maybe I didn't change them back to simple renard. I think from what I've gleamed from the threads is that the channel with the constant on may have something to do with the triac itself. I've removed it but don't have a wick to get the solder off to put one back in so that will have to wait, and we will just go around that channel for now. Will let you know what hex I had.
    Standing on the shoulders of others before us to make our home blink
    '07-17 Static incans and leds
    '18 Delayed but went on. 14k led, 4-TR24's 8 Sequences

  2. #22
    Junior Elf member
    Join Date
    Nov 2018
    Location
    Northeast Mass
    Posts
    15
    Mac, Thank you for the advice. I still had the wrong hex installed. Looks like we may get an weeks worth of showtime.
    Standing on the shoulders of others before us to make our home blink
    '07-17 Static incans and leds
    '18 Delayed but went on. 14k led, 4-TR24's 8 Sequences

  3. #23
    Workshop Elf Phoenix's Avatar
    Join Date
    Nov 2011
    Location
    Central Florida
    Posts
    4,426
    Quote Originally Posted by lites4bug View Post
    Mac, Thank you for the advice. I still had the wrong hex installed. Looks like we may get an weeks worth of showtime.
    If you need a hex file let me know and I will post it. I just need to know what baud rate you are using and if you want start addressing or just standard Renard protocol.
    Mac Macmillan,

    Renard Plus Design Engineer

    I have not failed. I've just found 10,000 ways that won't work. "Thomas Edison" PRNDL
    Become an Honorary DIGWDF Engineer, Donate HERE


    With 168 Channels


    RP Logo By Air_Run, Animation by TazChaLet
    Renard_Plus_Info------ Renard_Plus_Shopping

  4. #24
    Junior Elf member
    Join Date
    Nov 2018
    Location
    Northeast Mass
    Posts
    15
    Quote Originally Posted by Phoenix View Post
    If you need a hex file let me know and I will post it. I just need to know what baud rate you are using and if you want start addressing or just standard Renard protocol.
    Oh sorry, I installed the right one, but you were right it was the issue. Didn't finish plugging everything in and patching tonight, but we will have blinky-flashy tomorrow.
    Standing on the shoulders of others before us to make our home blink
    '07-17 Static incans and leds
    '18 Delayed but went on. 14k led, 4-TR24's 8 Sequences

Page 3 of 3 FirstFirst 123

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •